fw-rust: Handle screens differently, use encoder

Handle the screens differently and implement rotary encoder support.

firmware/rust/src/main.rs

@@ -1,3 +1,4 @@
+#![feature(abi_avr_interrupt)]
 #![no_std]
 #![no_main]
 
@@ -9,9 +10,9 @@ use atmega_hal::{
     spi::{DataOrder, SerialClockRate, Settings, Spi},
     Peripherals,
 };
-use avr_device::interrupt::{self, Mutex};
+use avr_device::interrupt;
 use avr_eeprom::{eeprom, Eeprom};
-use core::cell::RefCell;
+use core::sync::atomic::{AtomicBool, Ordering};
 use embedded_hal::{
     blocking::delay::DelayMs,
     spi::{FullDuplex, Mode, Phase, Polarity},
@@ -19,6 +20,9 @@ use embedded_hal::{
 use nb::block;
 use panic_halt as _;
 
+mod rotary;
+use rotary::{Direction, Rotary};
+
 eeprom! {
     static eeprom CONTRAST: u8 = 8;
     static eeprom BACKLIGHT: u8 = 1;
@@ -345,18 +349,25 @@ impl Lcd {
         }
     }
 
-    fn screen(&mut self) {
+    fn draw(&mut self, screen: &Screens) {
+        interrupt::free(|_cs| {
             self.clear();
 
-        interrupt::free(|cs| match &*SCREEN.borrow(cs).borrow() {
+            match screen {
                 Screens::Splash(splash) => {
                     splash.draw(self);
                 }
                 Screens::Home(home) => {
                     home.draw(self);
                 }
-        })
             }
+        });
+    }
+}
+
+enum Input {
+    Next,
+    Previous,
 }
 
 pub trait Draw {
@@ -414,6 +425,41 @@ struct HomeScreen {
     active: HomeSelection,
 }
 
+impl HomeScreen {
+    fn input(&self, input: &Input) -> Screens {
+        match input {
+            Input::Next => match self.active {
+                HomeSelection::Ch1 => Screens::Home(HomeScreen {
+                    active: HomeSelection::Ch2,
+                }),
+                HomeSelection::Ch2 => Screens::Home(HomeScreen {
+                    active: HomeSelection::Ch3,
+                }),
+                HomeSelection::Ch3 => Screens::Home(HomeScreen {
+                    active: HomeSelection::Setup,
+                }),
+                HomeSelection::Setup => Screens::Home(HomeScreen {
+                    active: HomeSelection::Ch1,
+                }),
+            },
+            Input::Previous => match self.active {
+                HomeSelection::Ch1 => Screens::Home(HomeScreen {
+                    active: HomeSelection::Setup,
+                }),
+                HomeSelection::Ch2 => Screens::Home(HomeScreen {
+                    active: HomeSelection::Ch1,
+                }),
+                HomeSelection::Ch3 => Screens::Home(HomeScreen {
+                    active: HomeSelection::Ch2,
+                }),
+                HomeSelection::Setup => Screens::Home(HomeScreen {
+                    active: HomeSelection::Ch3,
+                }),
+            },
+        }
+    }
+}
+
 impl Draw for HomeScreen {
     fn draw(&self, lcd: &mut Lcd) {
         match &self.active {
@@ -450,12 +496,27 @@ enum Screens {
     Home(HomeScreen),
 }
 
-// TODO: Investigate if this should also be volatile
-static SCREEN: Mutex<RefCell<Screens>> = Mutex::new(RefCell::new(Screens::Splash(SplashScreen)));
+impl Screens {
+    fn input(&mut self, input: &Input) {
+        match self {
+            Screens::Splash(_) => {}
+            Screens::Home(home) => *self = home.input(input),
+        }
+    }
+}
+
+static UPDATE_ENCODER: AtomicBool = AtomicBool::new(false);
+
+#[interrupt(atmega328p)]
+#[allow(non_snake_case)]
+fn PCINT0() {
+    interrupt::free(|_cs| {
+        UPDATE_ENCODER.store(true, Ordering::SeqCst);
+    })
+}
 
 #[atmega_hal::entry]
 fn main() -> ! {
-    interrupt::free(|cs| {
     // Get peripherals, pins, eeprom and delay
     let dp = Peripherals::take().unwrap();
     let pins = pins!(dp);
@@ -507,55 +568,60 @@ fn main() -> ! {
     };
     lcd.init(contrast);
 
+    // Init encoder
+    let mut encoder = Rotary::new(pins.pb6.into_pull_up_input(), pins.pb7.into_pull_up_input());
+    encoder.update();
+
+    // Enable interrupts for encoder // TODO: and switch
+    dp.EXINT.pcicr.write(|w| w.pcie().bits(0b0000_0001));
+    dp.EXINT.pcmsk0.write(|w| w.pcint().bits(0b1100_0000));
+
+    // Create screen
+    let mut screen = Screens::Splash(SplashScreen);
+
     // Draw splash screen
-        lcd.screen();
+    lcd.draw(&screen);
 
     // Show splash screen for a moment
     delay.delay_ms(2000_u16);
 
     // Set home screen
-        let screen = SCREEN.borrow(cs);
-        *screen.borrow_mut() = Screens::Home(HomeScreen {
+    screen = Screens::Home(HomeScreen {
         active: HomeSelection::Ch1,
     });
 
     // Draw screen
-        lcd.screen();
+    lcd.draw(&screen);
 
-        // Show splash screen for a moment
-        delay.delay_ms(1000_u16);
+    let mut update_screen = false;
 
-        // Demo select CH2
-        *screen.borrow_mut() = Screens::Home(HomeScreen {
-            active: HomeSelection::Ch2,
-        });
-
-        // Draw screen
-        lcd.screen();
-
-        // Show splash screen for a moment
-        delay.delay_ms(1000_u16);
-
-        // Demo select CH3
-        *screen.borrow_mut() = Screens::Home(HomeScreen {
-            active: HomeSelection::Ch3,
-        });
-
-        // Draw screen
-        lcd.screen();
-
-        // Show splash screen for a moment
-        delay.delay_ms(1000_u16);
-
-        // Demo select SETUP
-        *screen.borrow_mut() = Screens::Home(HomeScreen {
-            active: HomeSelection::Setup,
-        });
-
-        // Draw screen
-        lcd.screen();
-    });
+    // Enable interrupts globally
+    unsafe { interrupt::enable() };
 
     #[allow(clippy::empty_loop)]
-    loop {}
+    loop {
+        if UPDATE_ENCODER.load(Ordering::SeqCst) {
+            interrupt::free(|_cs| {
+                delay.delay_ms(3_u8);
+
+                match encoder.update() {
+                    Direction::Clockwise => {
+                        screen.input(&Input::Next);
+                        update_screen = true;
+                    }
+                    Direction::CounterClockwise => {
+                        screen.input(&Input::Previous);
+                        update_screen = true;
+                    }
+                    Direction::None => {}
+                }
+                UPDATE_ENCODER.store(false, Ordering::SeqCst);
+            })
+        }
+
+        if update_screen {
+            lcd.draw(&screen);
+            update_screen = false;
+        }
+    }
 }

firmware/rust/src/rotary.rs

@@ -0,0 +1,51 @@
+use embedded_hal::digital::v2::InputPin;
+
+pub struct Rotary<A, B> {
+    pin_a: A,
+    pin_b: B,
+    state: u8,
+}
+
+pub enum Direction {
+    Clockwise,
+    CounterClockwise,
+    None,
+}
+
+impl<A, B> Rotary<A, B>
+where
+    A: InputPin,
+    B: InputPin,
+{
+    pub fn new(pin_a: A, pin_b: B) -> Self {
+        Self {
+            pin_a,
+            pin_b,
+            state: 0,
+        }
+    }
+
+    pub fn update(&mut self) -> Direction {
+        let a = self.pin_a.is_low();
+        let b = self.pin_b.is_low();
+
+        let new_state = match (a, b) {
+            (Ok(true), Ok(true)) => 0b00,
+            (Ok(true), Ok(false)) => 0b01,
+            (Ok(false), Ok(true)) => 0b10,
+            (Ok(false), Ok(false)) => 0b11,
+            _ => return Direction::None,
+        };
+
+        let direction = match (self.state, new_state) {
+            (0b10, 0b11) => Direction::Clockwise,
+            (0b01, 0b00) => Direction::Clockwise,
+            (0b01, 0b11) => Direction::CounterClockwise,
+            (0b10, 0b00) => Direction::CounterClockwise,
+            _ => Direction::None,
+        };
+
+        self.state = new_state;
+        direction
+    }
+}