diff --git a/firmware/rust/src/main.rs b/firmware/rust/src/main.rs
index af812a2..8f8feff 100644
--- a/firmware/rust/src/main.rs
+++ b/firmware/rust/src/main.rs
@@ -24,7 +24,7 @@ eeprom! {
 }
 
 // TODO: Use https://github.com/rust-lang/rust/issues/85077 when stabilized
-static SACRED_CHAO: [[u8; 40]; 5] = [
+const SACRED_CHAO: [[u8; 40]; 5] = [
     [
         0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0xF0, 0xF0, 0xF8, 0xFC, 0xFC, 0xFE, 0xFE, 0xFE,
         0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xFE, 0xFE, 0xFC, 0xFC,
@@ -53,7 +53,7 @@ static SACRED_CHAO: [[u8; 40]; 5] = [
 ];
 
 // TODO: Use https://github.com/rust-lang/rust/issues/85077 when stabilized
-static ONDERS_ORG: [[u8; 48]; 2] = [
+const ONDERS_ORG: [[u8; 48]; 2] = [
     [
         0xE0, 0x60, 0xE0, 0x00, 0x00, 0xE0, 0x60, 0xE0, 0x00, 0x00, 0xE0, 0x60, 0xF8, 0x00, 0x00,
         0xE0, 0xA0, 0xE0, 0x00, 0x00, 0xE0, 0x20, 0x60, 0x00, 0x00, 0xE0, 0xA0, 0xA0, 0x00, 0x00,
@@ -90,6 +90,48 @@ fn clear_screen(spi: &mut Spi, cd: &mut Pin<Output, PB0>) {
     }
 }
 
+fn draw_splash(spi: &mut Spi, cd: &mut Pin<Output, PB0>) {
+    clear_screen(spi, cd);
+
+    let mut delay = Delay::<MHz8>::new();
+
+    for (i, page) in SACRED_CHAO.iter().enumerate() {
+        block!(spi.send(0x0F)).unwrap();
+        block!(spi.send(0x11)).unwrap();
+        block!(spi.send(0xB1 + i as u8)).unwrap();
+
+        // TODO: This delay fixes issues, try find a better solution
+        delay.delay_ms(1_u8);
+        cd.set_high();
+
+        for segment in page {
+            block!(spi.send(*segment)).unwrap();
+        }
+
+        // TODO: This delay fixes issues, try find a better solution
+        delay.delay_ms(1_u8);
+        cd.set_low();
+    }
+
+    for (i, page) in ONDERS_ORG.iter().enumerate() {
+        block!(spi.send(0x0A)).unwrap();
+        block!(spi.send(0x11)).unwrap();
+        block!(spi.send(0xB6 + i as u8)).unwrap();
+
+        // TODO: This delay fixes issues, try find a better solution
+        delay.delay_ms(1_u8);
+        cd.set_high();
+
+        for segment in page {
+            block!(spi.send(*segment)).unwrap();
+        }
+
+        // TODO: This delay fixes issues, try find a better solution
+        delay.delay_ms(1_u8);
+        cd.set_low();
+    }
+}
+
 #[atmega_hal::entry]
 fn main() -> ! {
     interrupt::free(|_cs| {
@@ -176,46 +218,8 @@ fn main() -> ! {
         block!(spi.send(0x08)).unwrap(); // (9)  Set Electronic Volume: Set Contrast // TODO: Use EEPROM
         block!(spi.send(0xAF)).unwrap(); // (12) Set Display Enable: Display on
 
-        // Clear screen
-        clear_screen(&mut spi, &mut lcd_cd);
-
-        // Draw sacred chao
-        for (i, page) in SACRED_CHAO.iter().enumerate() {
-            block!(spi.send(0x0F)).unwrap();
-            block!(spi.send(0x11)).unwrap();
-            block!(spi.send(0xB1 + i as u8)).unwrap();
-
-            // TODO: This delay fixes issues, try find a better solution
-            delay.delay_ms(1_u8);
-            lcd_cd.set_high();
-
-            for segment in page {
-                block!(spi.send(*segment)).unwrap();
-            }
-
-            // TODO: This delay fixes issues, try find a better solution
-            delay.delay_ms(1_u8);
-            lcd_cd.set_low();
-        }
-
-        // Draw onders.org
-        for (i, page) in ONDERS_ORG.iter().enumerate() {
-            block!(spi.send(0x0A)).unwrap();
-            block!(spi.send(0x11)).unwrap();
-            block!(spi.send(0xB6 + i as u8)).unwrap();
-
-            // TODO: This delay fixes issues, try find a better solution
-            delay.delay_ms(1_u8);
-            lcd_cd.set_high();
-
-            for segment in page {
-                block!(spi.send(*segment)).unwrap();
-            }
-
-            // TODO: This delay fixes issues, try find a better solution
-            delay.delay_ms(1_u8);
-            lcd_cd.set_low();
-        }
+        // Draw splash screen
+        draw_splash(&mut spi, &mut lcd_cd);
     });
 
     #[allow(clippy::empty_loop)]